SST-MP (Multi-Pressure) condensers provide generous pump down capacities, helping eliminate the need for receiver tanks. They offer a level of durability that will ensure many years of reliable performance. They are designed to work with standard and higher pressure refrigerants.
Standard Designs
SST-MP condensers are available in standard designs for water duty. The models feature high-efficiency tube surfaces, and they are available in 9 catalog models from 2 to 30 horsepower (HP). They are designed to provide generous pump down capacity to your system, eliminating the need for receiver tanks and additional piping. Recommended model for R404A and R410A. For glycol duty please consult ProSuite or contact the factory.
Tube Materials
SST-MP condensers are manufactured with internally and externally enhanced 3/4″ OD copper tubing. Heavy wall tube construction is available. The tubes can be easily serviced with commonly available tube cleaning equipment.
Customization
As standard, these units offer a horizontal, cleanable tube design. Custom vessels are available with special materials of construction as required by you or your client. Condensers can be made with stainless steel construction for use in corrosive environments.
Alternative Options
For less pump down capacity use HSE-MP units. For salt water applications use MST units. SST units can be used in conjunction with a HR or UR receivers for even greater pump down capacity.
Other Refrigerants
All other refrigerants must be approved by Standard Refrigeration before use.
Custom and larger models are available, please contact your local sales representative
*Ratings are based on entering water 85°F, leaving water 95°F, and saturated condensing temperature of 105°F with 5°F of subcooling
**Pump down capacities are based upon 90% of the shell open volume. Multipliers for refrigerants other than R-22: R-134A= R-22 cap x 1.015; R-404A= R-22 cap x .89
Nominal ratings include an additive fouling factor of 0.00025 ft2-hr-°F/ BTU as calculated per AHRI Standard 450
ProSuite software values are the most accurate
Tubing has high performance enhanced surfaces
Values shown are correct at the time of publication. All data should be reconfirmed at the time of purchase
HP = 15,000 Btu/hr
*Pump down capacities are based upon 90% of the shell open volume
Multiply pump down capacities by 0.11 to calculate minimum operating charge
