Menu

Home / Products / Water Cooled Condensers / AHX

AHX KETEMA
Shell and Tube
Horizontal Condensers

Formerly ACME series refrigerant condensers, this AHX Ketema condenser offers 22 models ranging from 24 to 380 nominal HP. This reliable design has been available for over 30 years and the dimensions are virtually unchanged.

Standard Designs
AHX Ketema condensers are available in these standard designs for water duty. For R410A or glycol duty please consult ProSuite or contact the factory.

Tube Materials
AHX Ketema condensers are manufactured with enhanced 3/4″ OD copper tubing. Heavy wall tube construction is available. The tubes can be easily serviced with commonly available tube cleaning equipment.

General Service Units- 350 psi Shell Side Working Pressure @ 150° F; 150 psi Tube Side at 150°F

 

 

Click on image to zoom

*Ratings are based on entering water 85°F, leaving water 95°F and saturated condensing temperature of 105°F with 5°F of subcooling
**Pump down capacities are based upon 90% of the shell open volume.
Multipliers for refrigerants other than R-22: R-134A= R-22 cap x 1.015; R-404A= R-22 cap x .89; R-410A=R-22 cap x 1.033
Nominal ratings include a additive fouling factor of 0.00025 ft2-hr-°F/ BTU as calculated per AHRI Standard 450
ProSuite software values are the most accurate
Tubing has high performance enhanced surfaces
Values shown are correct at the time of publication. All data should be reconfirmed at the time of purchase
HP = 15,000 Btu/hr