Menu

Home / Products / Receivers / HR Brackets & Valves

Horizontal Receiver
with Brackets
and Valves
Multi-Pressure
40-600 lbs Pump Down

RBV receivers offer a horizontal vessel design, with factory installed brackets and valves. Units are available in standard and higher pressure ratings.

Customization
Custom vessels are available with special materials of construction as required by you or your client. Condensers can be constructed from stainless steel for increased life in harsh environments. Sightglasses and liquid level indicators can be added at custom locations.

Shells
ASME specification steel pipe. Shells are sandblasted and cleaned prior to assembly.

Connections
All fluid connections are IDS. Safety connections are FNPT. Custom nozzle type, size, orientation, and locations are available.

Codes
The refrigerant side is constructed to the latest edition of the ASME Section VIII Div.1 code standards and is stamped accordingly, on all units 6⅝” OD and larger. Units 6″ OD and smaller are UL approved. Receivers are tested at 1.3 times the design pressure. Units are helium leak tested to find leaks as small as 1 x 10⁻⁵ mbar.l/s. Canadian registration numbers (CRN) are available upon request. For other code registrations please contact the factory.

 

Finish
Exterior surfaces are cleaned and painted with high-quality black paint and primer.

Maximum Allowable Working Pressures:
Standard Model – 450 psi. Shell Side @ 150°F
MP Model – 675 psi. Shell Side @ 150°F

Approved Refrigerants
R22, R134a, R404A & R507A. R410A in MP units only.

Non-Approved Refrigerants Unless Cleared by the Factory
R410A units in non-MP units.

Alternative Options
For horizontal receivers without valves and brackets, use HR. For upright receivers use UR or UV models. SST or MST condensers can be used to eliminate the need for a receiver, as these units hold extra pump-down capacity.

 

Click on image to zoom

Custom and larger models are available, please contact your local sales representative
Values shown are correct at the time of publication, all data should be reconfirmed at the time of purchase
Pumpdown capacities are based upon 90% of the shell open volume at 90°F
R404A Capacity = R22 Capacity X 0.99
R407C Capacity = R22 Capacity X 1.06
R507A Capacity = R22 Capacity X 0.87
R717 Capacity = R22 Capacity X 0.51

Click on image to zoom

Custom and larger models are available, please contact your local sales representative
Values shown are correct at the time of publication, all data should be reconfirmed at the time of purchase
Pumpdown capacities are based upon 90% of the shell open volume at 90°F
R404A Capacity = R22 Capacity X 0.99
R407C Capacity = R22 Capacity X 1.06
R507A Capacity = R22 Capacity X 0.87
R717 Capacity = R22 Capacity X 0.51