HSE-MP (Multi-Pressure) condenser design provides a compact, durable, and cost-effective solution. They are designed to work with both higher and standard pressure refrigerants.
Standard Designs
HSE-MP condensers are available in standard designs for water duty. The models feature high-efficiency tube surfaces, and they are available in 16 catalog models from 2 to 125 horsepower (HP). They are optimized with a small footprint, which requires less space. Recommended model for R404A and R410A. For glycol duty please consult ProSuite or contact the factory.
Tube Materials
HSE-MP condensers are manufactured with internally and externally enhanced 3/4″ OD copper tubing. Heavy wall tube construction is available. The tubes can be easily serviced with commonly available tube cleaning equipment.
Customization
As standard, these condensers offer a horizontal, cleanable tube design. Custom vessels are available with special materials of construction as required by you or your client. Condensers can be made with stainless steel construction for use in corrosive environments.
Alternative Options
For greater pump down capacity use SST-MP units. For seawater applications use MSE-MP units.
Custom and larger models are available, please contact your local sales representative
*Ratings are based on entering water 85°F, leaving water 95°F, and saturated condensing temperature of 105°F with 5°F of subcooling
**Pump down capacities are based upon 90% of the shell open volume. Multipliers for refrigerants other than R-22: R-134A= R-22 cap x 1.015; R-404A= R-22 cap x .89; R-410A=R-22 x 1.033
Nominal ratings include an additive fouling factor of 0.00025 ft2-hr-°F/ BTU as calculated per AHRI Standard 450.
ProSuite software values are the most accurate
Tubing has enhanced internal and external surfaces
Values shown are correct at the time of publication. All data should be reconfirmed at the time of purchase
HP = 15,000 Btu/hr
* Pumpdown capacities are based upon 90% of the shell open volume
Multiply pumpdown capacities by 0.11 to calculate minimum operating charge
Values shown are correct at the time of publication, all data should be reconfirmed at the time of purchase
